Sanitary Tri Clamp Magnetic Flow Meter Water Milk
The sanitary flowmeter adopts PTFE lining material to meet the hygienic requirements of the food industry. It adopts stainless steel structure and stainless steel clamp connection. It is convenient for quick disassembly and cleaning of electromagnetic fThe Hygienic electromagnetic flowmeter adopts a new Hygienic lining material and lining process, which meets the Hygienic requirements of the food industry. At the same time, the stainless steel shell and stainless steel clamp connection are used to facilitate the rapid disassembly and cleaning of the electromagnetic flowmeter, so that the electromagnetic flowmeter is not easy to be polluted during use, and can effectively prevent the accumulation of measuring fluid residues in the measuring pipe. It can be widely used in mineral water, soy sauce, jam, beer The production and manufacturing process of fruit juice, rice wine, milk and other foods, as well as the fields of health and chemical industry.
Function:
♦ Uses new type lining material to prevent the accumulation of measuring medium residues in the measuring pipe.
♦ Adopted quick connection scheme, is convenient for disassembly, maintenance and cleaning.
♦ Used 16 bit embedded microprocessor for signal processing, and is characterized by high integration, fast calculation speed, high calculation accuracy, full digital signal processing, strong anti-interference ability, and reliable measurement.
Advantages:
Simple structure, no moving parts, no blocking parts, no voltage loss;It can measure various corrosive media such as acid, alkali and salt;
There are two types of integration and separation.
High definition LCD backlight display.
Technical Specification:
Nominal diameter (mm) (special specifications can be customized) | Pipeline type PTFE lining: DN10 ～ DN200 | |
Flow direction: | Positive, negative, net flow | |
Repeatability error: | ± 0.1% of measured value | |
Accuracy class: | Pipeline type: Grade 0.5, Grade 1.0 | |
Temperature of measured medium: | PTFE lining: - 30~+120 ℃ | |
Rated working pressure: (High pressure can be customized) | DN10－DN200: ≤1.0MPa | |
Flow rate range: | 0.1－15m/s | |
Conductivity range: | Conductivity of measured fluid ≥ 5 μ s/cm | |
Current output: | Load resistance | 0～10mA：0～1.5kΩ |
4～20mA：0～750 kΩ | ||
Digital frequency output: | The upper limit of output frequency can be set within 1~5000HZ for open circuit bidirectional output of transistor collector with photoelectric isolation. The maximum current of collector is 250mA when the external power supply is ≤ 35V | |
Power supply: | AC220V, DC24V or 3.6V batteries | |
Required straight pipe length | Upstream ≥ 5DN, downstream ≥ 2DN | |
Connection mode: | Clamp type connection is adopted between flowmeter and piping | |
Explosion proof grade: | EXdIIBT4 | |
Protection grade: | IP65, specially customized up to IP68 | |
Ambient temperature: | －25～+60℃ | |
Relative temperature: | 5%～95% | |
Total power consumed: | ＜20W | |
