New Type Micro Miniature Ultrasonic Flow Meter
Name: Integrated external clip ultrasonic flowmeter
Model: F6
Size: 139 * 71 * 95mm
Brief description:
Special external clamp ultrasonic flowmeter for small pipe diameter, DN15-DN40 small pipe diameter is preferred. Simple installation and convenient operation. No need to break the pipe or stop the construction for a long time and the installation can be completed easily in a few minutes.
Product Features:
● Easily and friendly for installation and operation. It only takes a few minutes, from the start of installation to using the flow meter.
● Adopts a new external clamp design, which could get the flow rate without touching the measurement medium. Compared with another traditional flow meter, this could avoid pressure loss or media contamination problems.
● As the advantage of a clamp on flow meter, no need to cut off the pipe or long time to stop the equipment, saving the cost of time and labor costs.
● A variety of modes are available for setting and flexibility. One set is universal for all pipe sizes in the measuring range and suitable for many kinds of metal and resin pipes.
● 256*128 LCD display. Display a variety of information.
● It is optional to become an ultrasonic cooling (heat) meter/ BTU meter/ energy meter to realize the monitoring and measurement of energy.
Technical parameter:
Pipe material | Metal /PVC, PP or PVDF rigid plastic pipe |
Liquid type | Water /other liquid (Single liquid medium without solid particles or impurities) |
Temperature range | 0-75℃ (No freezing on the surface) |
Low velocity cut off value | 0.1m/s |
Display | 256*128, LCD |
Response time | 0.5~60s |
Accuracy | ±2%, (±1% after calibration) |
Data Storage period | 300ms |
Memory for data backup | EEPROM (Data storage: over 10 years, data read/write frequency: over 1 million times) |
Power and I/O connection | M12 type aviation plug |
Output | 4-20mA |
Communication | Modbus RS485 |
(Options for output) | OCT (pulse output)/ One relay alarm (please contact the factory) |
Power supply | 10-24V VDC |
Electric power | < 3W |
Protective circuit | Power reverse connection protection, Power surge protection, |
Output short circuit protection, Output surge protection | |
Enclosure protection class | IP65 |
Environment temperature | -10 to 60°C (No freezing) |
Relative humidity | 35 to 85% RH (No condensation) |
Vibration resistance | 10 to 55 Hz |
double amplitude 1.5 mm, 2 hours in each XYZ axis | |
Impact resistant | 100 m/s2 16 ms pulse, 1000 times each for X, Y and Z axis |
Main material | Aluminum, Industrial Plastics |
cable length | 2m(standard ), PT1000 sensor standard cable length is 9m |
Notice: The minimum measurable pipe size is the inner diameter >/= 12mm
