Inline Ultrasonic Pipe Flow Meter
The pipe section ultrasonic flow meter is a measurement method that uses flanges to directly connect the pipe section sensor and the pipeline to be measured. This product solves the problem of measuring accuracy decline caused by errors caused by humans or inaccurate parameters of the pipeline to be measured during the installation of the external clip and plug-in sensors. It has the characteristics of high measurement accuracy, good stability, maintenance-free, etc., and is the development direction of the future ultrasonic flowmeter.
Product Parameters:
● Power supply mode:DC8-36V or AC10-30V, AC85-264V, optional waterproof power adapter
● High protection grade:
The protection grade can reach IP68, and it can work underwater for 2 meters
● Universal design:
The length of the pipe section is designed according to the length of the ordinary mechanical water meter for easy replacement
● Strong structure:
The measuring pipe section adopts the precision casting process, without leakage, pressure loss, and moving parts, and has a 10-year maintenance-free design
● Large measuring range:
Different types of sensors can be used to measure the diameter of the DN15-DN60mm pipeline
● Human biochemical design:
Magnetic rod operation, easy to operate; Fault self-diagnosis and graphical fault indicator; Cyclic display of positive and negative cumulative flow, instantaneous flow, flow rate, etc.
Technical parameter:
Accuracy | ±1% |
Flow range | 0 ± 10m / s, forward and reverse measurement |
Pipe size | DN15-DN6000MM |
Fluid temperature | -30℃~160℃ |
Fluid types | Water, sea water, sewage, acid-base liquid, alcohol, beer, all kinds of oil and other single uniform liquid which can conduct ultrasonic wave |
Pipe material | Steel, stainless steel, cast iron, copper, PVC, aluminum, FRP etc. all dense pipes, lining is allowed |
Signal output | 1 Channel 4 ~ 20mA current, output impedance 0 ~ 1K, accuracy 0.1% 1 channel OCT pulse output pulse width 6 ~ 1000ms 1 relay output |
Signal input | Three channels of 4 ~ 20mA current input can be used as data collector and connected with three wire PT100 platinum resistor to realize heat measurement |
Communication port | Isolated RS485 serial interface, support Modbus protocol |
Power supply | DC8 ~ 36V or AC10 ~ 30V AC85 ~ 264v, equipped with waterproof power adapter |
